Siemens Actuator Servomotor SQM33 Series

Siemens Actuator Servomotor SQM33 Series is an electromotoric actuator designed to drive and accurately position air dampers (Air Damper), gas dampers (Gas Damper), and oil control valves (Oil Control Valve) in oil and gas burner systems (Oil & Gas Burner). It features a stepper motor and an integrated position feedback system, delivering rated output torques from 1.2 to 10 Nm, depending on the model, with a maximum usable angular range of 90°. The actuator can be integrated with compatible Siemens LMV2 / LMV3 burner control units to adjust damper and valve positions according to burner load requirements and support electronic fuel/air ratio control.

Key Features

• Rated Output Torque: 1.2 Nm, 3 Nm, and 10 Nm for SQM33.4, SQM33.5, and SQM33.7 models, respectively.

• 90° Running Time: Approximately 5 seconds for SQM33.4 / SQM33.5 and 17 seconds for SQM33.7.

• Operating Voltage: AC/DC 24 V ±20%.

• Positioning Resolution: 0.1° with integrated position feedback.

• Rotation Direction: Supports clockwise and counterclockwise rotation, configurable through the main control unit.

• Construction: Die-cast aluminum housing, impact-resistant and heat-resistant plastic cover, and low-backlash gear train.

• Degree of Protection: IP54 or IP40, depending on model and installation configuration.

• Operating Temperature: -20°C to +60°C.

Operating Principle

The Siemens SQM33 Series receives positioning commands from the burner control unit and drives the motor shaft to the specified position. Rotation direction, running time, and end positions can be configured through a compatible main control unit, such as Siemens LMV27. Its stepper motor and low-backlash gear train enable precise positioning of air dampers and fuel control valves. The actuator is suitable for combustion systems that require adjustment of air and fuel flow according to burner operating load.

Applications

Suitable for industrial burner control systems (Industrial Burner Control), air and gas damper control, fuel control valve applications, and electronic fuel/air ratio control systems. Proper model selection should consider required torque, actuator specifications, compatibility with the burner control unit, and actual installation conditions.

Siemens SQM33 Series is an electromotoric actuator designed for precise positioning of air dampers, gas dampers, and fuel control valves in oil and gas burner systems. Equipped with a stepper motor and position feedback system, it transmits position information through the same connecting cable used by the control system. The series provides a maximum rated output torque of 10 Nm and a usable angular range of up to 90°. Rotation direction, running time, and end positions can be configured through compatible burner control units, such as Siemens LMV27. It is suitable for burner manufacturers and combustion system integrators requiring accurate fuel-to-air ratio control.