02 322 1678-87 Burner 02 322 9365-66 [email protected] @boonyium
TH | EN
SIEMENSgas-air-valves-and-actuators

Siemens Actuator SKP25 Series

Siemens Actuator SKP25 Series is an electrohydraulic gas valve actuator with an integrated gas pressure governor, designed for industrial gas burners and combustion systems. It provides gas pressure regulation, damped valve opening, and rapid safety shut-off. Compatible with suitable Siemens VGx/VRx gas valves, the SKP25 Series is used in industrial boiler systems, forced-draft burners, and gas combustion applications.

Product Details

Siemens Actuator SKP25 Series

Siemens Actuator SKP25 Series

Siemens Actuator SKP25 Series is an electrohydraulic gas valve actuator equipped with a gas pressure governor. It is designed for gas pressure regulation and safety shut-off applications in industrial burners and combustion systems.

When combined with compatible Siemens VGx/VRx gas valves, the SKP25 actuator provides controlled valve opening, rapid closing, and gas pressure regulation according to the selected setpoint. The actuator is primarily used with forced-draft gas burners and industrial combustion equipment.

Key Features

  • Electrohydraulic gas valve actuator with gas pressure governor
  • Gas pressure regulation using a setpoint spring or air pressure signal, depending on the model
  • Damped opening and rapid closing for gas safety shut-off
  • Compatible with suitable Siemens VGx/VRx gas valves
  • Suitable for gas families I-III, subject to valve compatibility
  • Valve stroke indication
  • Optional factory-set end switch for closed-position indication
  • IP54 protection, upgradeable to IP65 with specified accessories

SKP25 Series Models

  • SKP25.0: Constant gas pressure regulation for mechanical or electronic air/fuel ratio control systems
  • SKP25.2: Two-stage pressure setpoint changeover
  • SKP25.3: Proportionate pressure governor
  • SKP25.4: High-pressure regulation with control ranges up to 200 kPa
  • SKP25.6: Zero pressure governor

Applications

  • Industrial gas burners
  • Industrial boiler systems
  • Forced-draft gas burners
  • Gas train pressure control systems
  • Industrial heating equipment
  • Gas-fired combustion systems

Note: The actuator model, supply voltage, pressure regulation range, and valve compatibility must be verified before selection. Installation and commissioning must be performed by qualified personnel.

Siemens Actuator SKP25 Series

Technical Specifications

Siemens SKP25 Series Technical Specifications

Brand Siemens
Series SKP25 Series
Product Type Electrohydraulic Gas Valve Actuator
Control System Gas Pressure Governor
Main Function Safety Shut-Off and Gas Pressure Regulation with compatible gas valves
Supply Voltage AC 230 V (-15%/+10%) - E2 models
AC 120 V (-15%/+10%) - E1 models
Japan-specific versions available
Frequency 50/60 Hz ±6% (European versions)
Power Consumption Max. 10 VA (standard Ex versions)
Max. 35 VA (SKP25.2xxEx, stage 2)
Closing Time Less than 1 second
Typical Opening Speed Approx. 2 mm/s
Degree of Protection IP54 / IP65 with specified AGA66 accessories and installation
Safety Class Class I
Gas Families I-III
Maximum Operating Pressure 120 kPa - SKP25.0/.2/.3/.6
230 kPa - SKP25.4 with VGJ valve
Operating Temperature -10 to +60°C (general range; model-specific restrictions apply)
Duty Cycle 100%
Weight Approx. 1.6 kg (SKP25.0)
Approx. 2.1 kg (SKP25.2)
Compatible Valves Siemens VGx/VRx Series, subject to compatibility requirements

Gas Pressure Regulation Ranges

Model Gas Pressure Control Range
SKP25.0 0.05-25 kPa
SKP25.2 0.2-6 kPa
SKP25.2xxxxL 0.2-2 kPa
SKP25.3 0.05-5 kPa
SKP25.4 7-200 kPa
SKP25.6 Zero Pressure Governor (control pressure below atmospheric reference)

Note: The actual regulation range depends on the actuator version and selected setpoint spring. The permissible pressure of the complete valve assembly is limited by its lowest-rated component.

Dimensions

Documents & Downloads

SIEMENS_ACTUATOR_SKP-7643_2022PDF
Download

Frequently Asked Questions

For product questions, please contact our engineering team.

Need expert assistance?

Our engineers can help choose suitable equipment.

Contact us

Request a Quotation / Product Inquiry

Send your product inquiry and our team will contact you.